Engineered Oak Wood Flooring Restoration

Before the renovation works...

The oak engineered wood flooring in this Soho house was overall looking tired and in urgent need of refinishing. During our free survey, we did detailed inspection of the floors and discussed with the client all possible options.

Our client has decided to go for floor sanding, of 84 sqm oak engineered wood flooring and finishing the floors in matt Lacquer.

How we completed the renovation works...

Engineered flooring planks come in 3 main standards of thickness, which also defines how thick is the available for sanding oak top layer of the product. Depending on the overall condition of the floors, the initial engineered floor sanding may start with coarser or medium grid. The task of this stage is not only to remove the previous finish and get the floors to bare wood, but also to provide a good level throughout the entire floor. In the case of engineered wood flooring, the level of the floor is usually good, due the "click" or "tongue-and-groove" locking between the planks.

Sanding the floors with fine grids (80 - 120 gr) and a good rotary buff to the oak timber surface with high grid buffing screens is the most important stage in the preparation of the wooden flooring for finishing.

The engineered wood flooring was consequently sealed with 1 coat of primer and 3 coats of Bona Mega Lacquer in matt sheen with another light screen buff between the coats, for an excellent final touch to the finish.