These floorboards in originally poor state, were deliberately revived to new finish preserving the rustic character and colour variation
Before the restoration works...
The pine floorboards in this Blackheath house was overall looking tired and in serious need of refinishing. During our obligation-free survey, we did detailed inspection of the floors and discussed with the client all possible options.
Our client has decided to go for floor sanding, of 22 sqm pine floorboards and finishing the floors in matt Lacquer.
How the renovation of the floors went...
The thickness of the pine victorian floorboards used for properties is approx. 20 mm when laid. Pine timber shrinks with the time and also becomes thinner every time the floors are restored. The nominal thickness, after which floorboards cannot be restored any further is approx. 15 mm.
Depending on the overall condition and level throughout, the initial floor sanding of the floorboards may start with coarser or medium grid. The purpose of the preparatory floorboards sanding stage is to remove the previous finish and level the floorboards throughout.
Unless the pine victorian floorboards have been renovated already in past 10 - 15 years, they will usually not have a good level. Floorboards covered previously by carpets, may have cupping and larger gaps.
Sanding the floors with fine grids (80 - 120 gr) and a good rotary buff to the pine timber surface with high grid buffing screens is the most important stage in the preparation of the wooden flooring for finishing.
The floorboards was consequently sealed with 1 coat of primer and 2 coats of Bona Mega Lacquer in matt sheen with another light screen buff between the coats, for an excellent final touch to the finish.