Floor sanding, staining, floor repairs of floorboards in Rickmansworth
Before the works...
The pine floorboards in this Rickmansworth Property was overall looking tired and in desperate need of renovation. During our obligation-free survey, we did detailed inspection of the floors and discussed with the client all possible options.
Our client has decided to go for floor sanding, staining, floor repairs, gap filling, of pine floorboards and finishing the floors in Lacquer.
How we completed the restoration works...
Our floor refinishing service begins with detailed inspection of the floors and any repairs to the floorboards will be completed in this initial stage. In this project approx. we have repaired approx. of floorboards.
The original thickness of the original floorboards used for residential properties is approx. 20 mm when laid. Pine timber shrinks with the time and also becomes thinner every time the floors are restored. The minimal thickness, after which floorboards cannot be restored any further is approx. 15 mm.
Depending on the overall condition and level throughout, the initial floor sanding of the floorboards may start with coarser or medium grid. The purpose of the initial floorboards sanding stage is to remove the previous finish and level the floorboards throughout.
Unless the victorian floorboards have been renovated already in past 10 - 15 years, they will usually not have a good level. Floorboards covered previously by carpets, may have cupping and larger gaps.
Next stage in the process of wood floor sanding was the application of the gap filling. We aim to apply the resin filler with saw dust in late hours of the working day, so it settles properly overnight and in case it is needed we can repeat it on the following morning , if required. The resin gap filling is after that removed by next stages of the floor sanding process in medium grids .
Our team prepared few samples on the unfinished sanded timber surface for the client to approve prior to application of the finish. The client chose to go for a beautiful stain colour to compliment the room interior.
Sanding the floors with fine grids (80 - 120 gr) and a good rotary buff to the pine timber surface with high grid buffing screens is the most important stage in the preparation of the wooden flooring for finishing.
The floorboards was consequently sealed with 1 coat of primer and 2 coats of Lacquer in sheen with another light screen buff between the coats, for an excellent final touch to the finish.
