Before the renovation works...
The maple engineered wood flooring in this Chigwell Property was overall looking tired and in urgent need of restoration. During our initial survey, we did detailed inspection of the floors and discussed with the client all possible options.
Our client has decided to go for floor sanding, of 45 sqm maple engineered wood flooring and finishing the floors in matt Lacquer.
How we made it happen...
One of the challenges we experienced while working on this project, was the amount of furniture, which we had to work around in stages.
Engineered flooring planks come in 3 main standards of thickness, which also defines how thick is the available for sanding maple top layer of the product. Depending on the overall condition of the floors, the initial floor sanding may start with coarser or medium grid. The task of this stage is not only to remove the previous finish and get the floors to bare wood, but also to provide a good level throughout the entire floor. In the case of engineered wood flooring, the level of the floor is usually good, due the "click" or "tongue-and-groove" locking between the planks.
Sanding the floors with fine grids (80 - 120 gr) and a good rotary buff to the maple timber surface with high grid buffing screens is the most important stage in the preparation of the wooden flooring for finishing.
The engineered wood flooring was consequently sealed with 1 coat of primer and 2 coats of Bona Mega Lacquer in matt sheen with another light screen buff between the coats, for an excellent final touch to the finish.
