Staining, floor sanding, floor repairs of floorboards in Battersea
Before the restoration works...
The pine floorboards in this Battersea Property was overall looking tired and in serious need of refinishing. During our initial survey, we did detailed inspection of the floors and discussed with the client all possible options.
Our client has decided to go for staining, floor sanding, floor repairs, of 50 sqm pine floorboards and finishing the floors in matt Lacquer.
How the renovation of the floors went...
Our floor restoration service begins with detailed inspection of the floors and any repairs to the floorboards will be completed in this initial stage. In this project approx. we have repaired approx. 2 sqm of floorboards.
The thickness of the pine floorboards used for properties is approx. 20 mm when laid. Pine timber shrinks with the time and also becomes thinner every time the floors are restored. The nominal thickness, after which floorboards cannot be restored any more is approx. 15 mm.
Depending on the overall condition and level throughout, the initial floor sanding of the floorboards may start with coarser or medium grid. The purpose of the introductory floorboards sanding stage is to remove the previous finish and level the floorboards throughout.
Unless the original floorboards have been sanded in past 10 - 15 years, they will usually not have a good level. Floorboards covered previously by carpets, may have cupping and larger gaps.
A number of colour samples were provided on a sanded surface for the client to review and approve, prior to application of the colour and finishing the floors. The client decided to go with floor staining in colour.
Sanding the floors with fine grids (80 - 120 gr) and a good rotary buff to the pine timber surface with high grid buffing screens is the most important stage in the preparation of the wooden flooring for finishing.
The floorboards was consequently sealed with 1 coat of primer and 2 coats of Bona Mega Lacquer in matt sheen with another light screen buff between the coats, for an excellent final touch to the finish.
